Wastewater treatment is the process of converting wastewater – water that is no longer needed or is no longer suitable for use – into bilge water that can be discharged back into the environment. It’s formed by a number of activities including bathing, washing, using the toilet, and rainwater runoff. Wastewater is full of contaminants including bacteria, chemicals and other toxins. Its treatment aims at reducing the contaminants to acceptable levels to make the water safe for discharge back into the environment.

There are two wastewater treatment plants namely chemical or physical treatment plant, and biological wastewater treatment plant. Biological waste treatment plants use biological matter and bacteria to break down waste matter. Physical waste treatment plants use chemical reactions as well as physical processes to treat wastewater. Biological treatment systems are ideal for treating wastewater from households and business premises. Physical wastewater treatment plants are mostly used to treat wastewater from industries, factories and manufacturing firms. This is because most of the wastewater from these industries contains chemicals and other toxins that can largely harm the environment.

Wastewater treatment is a process to convert wastewater – which is water no longer needed or suitable for its most recent use – into an effluent that can be either returned to the water cycle with minimal environmental issues or reused. The latter is called water reclamation and implies avoidance of disposal by use of treated wastewater effluent for various purposes.

Step by Step Wastewater Treatment Process

The following is a step by step process of how wastewater is treated:

1. Wastewater Collection

This is the first step in waste water treatment process. Collection systems are put in place by municipal administration, home owners as well as business owners to ensure that all the wastewater is collected and directed to a central point. This water is then directed to a treatment plant using underground drainage systems or by exhauster tracks owned and operated by business people. The transportation of wastewater should however be done under hygienic conditions. The pipes or tracks should be leak proof and the people offering the exhausting services should wear protective clothing.

2. Odor Control

At the treatment plant, odor control is very important. Wastewater contains a lot of dirty substances that cause a foul smell over time. To ensure that the surrounding areas are free of the foul smell, odor treatment processes are initiated at the treatment plant. All odor sources are contained and treated using chemicals to neutralize the foul smell producing elements. It is the first wastewater treatment plant process and it’s very important.

3. Screening

This is the next step in wastewater treatment process. Screening involves the removal of large objects for example nappies, cotton buds, plastics, diapers, rags, sanitary items, nappies, face wipes, broken bottles or bottle tops that in one way or another may damage the equipment. Failure to observe this step, results in constant machine and equipment problems. Specially designed equipment is used to get rid of grit that is usually washed down into the sewer lines by rainwater. The solid wastes removed from the wastewater are then transported and disposed off in landfills.

4. Primary Treatment

This process involves the separation of macrobiotic solid matter from the wastewater. Primary treatment is done by pouring the wastewater into big tanks for the solid matter to settle at the surface of the tanks. The sludge, the solid waste that settles at the surface of the tanks, is removed by large scrappers and is pushed to the center of the cylindrical tanks and later pumped out of the tanks for further treatment. The remaining water is then pumped for secondary treatment.

5. Secondary Treatment

Also known as the activated sludge process, the secondary treatment stage involves adding seed sludge to the wastewater to ensure that is broken down further. Air is first pumped into huge aeration tanks which mix the wastewater with the seed sludge which is basically small amount of sludge, which fuels the growth of bacteria that uses oxygen and the growth of other small microorganisms that consume the remaining organic matter. This process leads to the production of large particles that settle down at the bottom of the huge tanks. The wastewater passes through the large tanks for a period of 3-6 hours.

6. Bio-solids handling

The solid matter that settle out after the primary and secondary treatment stages are directed to digesters. The digesters are heated at room temperature. The solid wastes are then treated for a month where they undergo anaerobic digestion. During this process, methane gases are produced and there is a formation of nutrient rich bio-solids which are recycled and dewatered into local firms. The methane gas formed is usually used as a source of energy at the treatment plants. It can be used to produce electricity in engines or to simply drive plant equipment. This gas can also be used in boilers to generate heat for digesters.

7. Tertiary treatment

This stage is similar to the one used by drinking water treatment plants which clean raw water for drinking purposes. The tertiary treatment stage has the ability to remove up to 99 percent of the impurities from the wastewater. This produces effluent water that is close to drinking water quality. Unfortunately, this process tends to be a bit expensive as it requires special equipment, well trained and highly skilled equipment operators, chemicals and a steady energy supply. All these are not readily available.

8. Disinfection

After the primary treatment stage and the secondary treatment process, there are still some diseases causing organisms in the remaining treated wastewater. To eliminate them, the wastewater must be disinfected for at least 20-25 minutes in tanks that contain a mixture of chlorine and sodium hypochlorite. The disinfection process is an integral part of the treatment process because it guards the health of the animals and the local people who use the water for other purposes. The effluent (treated waste water) is later released into the environment through the local water ways.

9. Sludge Treatment

The sludge that is produced and collected during the primary and secondary treatment processes requires concentration and thickening to enable further processing. It is put into thickening tanks that allow it to settle down and later separates from the water. This process can take up to 24 hours. The remaining water is collected and sent back to the huge aeration tanks for further treatment. The sludge is then treated and sent back into the environment and can be used for agricultural use.

Wastewater treatment has a number of benefits. For example, wastewater treatment ensures that the environment is kept clean, there is no water pollution, makes use of the most important natural resource; water, the treated water can be used for cooling machines in factories and industries, prevents the outbreak of waterborne diseases and most importantly, it ensures that there is adequate water for other purposes like irrigation.

Conclusion

In summary, wastewater treatment process is one of the most important environmental conservation processes that should be encouraged worldwide. Most wastewater treatment plants treat wastewater from homes and business places. Industrial plant, refineries and manufacturing plants wastewater is usually treated at the onsite facilities. These facilities are designed to ensure that the wastewater is treated before it can be released to the local environment. Some of the water is used for cooling the machines within the plants and treated again. They try to ensure that nothing is lost. It illegal for disposing untreated wastewater into rivers, lakes, oceans or into the environment and if found culpable one can be prosecuted.

References: www.conserve-energy-future.com

Image credit: Chesapeake